1. Definitions
“Company”, “we”, “us”, “our” means Golf Draw and Fade Limited, company number 17343572.
“Website” means golfdrawandfade.com.
“Product” means the Vector Shaper laser golf training device, including the Junior model.
“You”, “your” means the customer purchasing or using the Product.
2. About us
Golf Draw and Fade Limited is the UK manufacturer and supplier of Vector Shaper. All sales through the Website are governed by these Terms & Conditions.
3. Product description
Vector Shaper is a Class 3R laser golf training device designed to assist with foot alignment and swing path visualisation. We reserve the right to update product specifications without prior notice.
4. Laser safety and important warnings
4.1 Laser classification
Vector Shaper is a Class 3R laser product under BS EN 60825-1. Class 3R visible lasers (typically up to 5 mW) can cause eye injury if the beam is viewed directly. They are not considered intrinsically safe.
Consumer laser products sold in the UK must also meet BS EN 50689:2021 (particular requirements for consumer laser products), as referred to in UK product-safety guidance. Consumer laser products may be Class 1, Class 2, or a defined subgroup of Class 3R. Class 3B and Class 4 lasers are not suitable for general consumer sale. Products that are child-appealing must not exceed Class 1.
The Junior model is not a toy. It is a training device for shorter / younger players and must be used under direct adult supervision. Mandatory Class 3R warning and aperture labels are affixed to the device. User information is supplied with the Product.
4.2 Device operation
The device has no manual on/off switch and uses a mechanical tilt-activation switch. The lasers will activate when the device is tilted to approximately 70° from vertical (normal ground-use position). The lasers will deactivate when the device is lifted and tilted beyond approximately 30° from horizontal.
4A. Before first use — mandatory instructions
To ensure safe handling and prevent accidental laser activation, you must follow these instructions before using the Product for the first time.
4A.1 Safe removal from packaging
Vector Shaper uses a mechanical tilt-activation switch, meaning the lasers will activate the moment the device reaches the trigger angle. To prevent accidental activation during unpacking:
- Ensure the packaging is positioned upright before opening.
- Lift the device straight up and vertically out of the packaging.
- Do not tilt, tip, or rotate the device horizontally during removal.
- Keep the device pointed away from people, animals, reflective surfaces, and aircraft at all times.
4A.2 Charge before first use
The Product may partially de-charge during storage or transit. Before first use:
- Charge the device fully using the supplied charging cable.
- The device may be charged vertically or lying flat upside-down, which prevents the mechanical tilt switch from activating the lasers.
- Do not attempt to operate the device until charging is complete.
4A.3 Initial handling
After charging:
- Keep the device upright until you are ready to place it on the ground.
- Do not lift or hold the device parallel to the ground, as the mechanical tilt switch will activate the lasers at the trigger angle.
- Only place the device on the ground when you are ready to begin setup.
4A.4 Read the user guide
Before operating the device: read the full user guide supplied with the Product. Ensure all users (including juniors) understand the mandatory safety requirements.
4A.5 Adult supervision
Vector Shaper is a Class 3R laser device. The Junior model must only be used under direct adult supervision.
4.3 Mandatory safety rules
You agree to:
- Use the device only on the ground as intended.
- Never point the lasers at people, animals, vehicles, aircraft, or reflective surfaces.
- Never look directly into the laser beams or view them through optical instruments.
- Ensure adult supervision at all times. The Junior model must be used under direct adult supervision.
- Read the full user guide before first use.
4.4 Storage and charging
Store the device upright or at an angle greater than 45° from horizontal when not in use. The device may be charged while lying flat (upside down) or vertically.
4.5 Legal warning
Never point the lasers at people, animals, vehicles or aircraft. Misuse of a laser in relation to vehicles may constitute a criminal offence under the Laser Misuse (Vehicles) Act 2018. You accept full responsibility for safe operation.
5. Ordering, payment and delivery
Orders placed on the Website constitute an offer. We accept the order by email confirmation. All prices include VAT where applicable. Delivery times are estimates only. Risk passes to you on delivery.
6. Returns, refunds and warranty
6.1 Statutory rights
Nothing in these Terms affects your rights under the Consumer Rights Act 2015. Faulty goods will be repaired, replaced, or refunded in accordance with UK consumer law.
6.2 Cooling-off period
If you buy as a consumer on the Website you have a statutory 14 days to cancel, starting the day after the Product is delivered. You do not need to give a reason. Email hello@golfdrawandfade.com within that period. You then have a further 14 days to send the Product back.
We will refund you within 14 days of receiving the returned Product, or of you giving evidence of return, whichever is earlier. You pay the cost of return unless the Product is faulty or not as described.
You may inspect the Product as you would in a shop. If you handle it beyond that — for example you use it on the range or the course — we may deduct from the refund an amount for diminished value, as allowed by the Consumer Contracts (Information, Cancellation and Additional Charges) Regulations 2013.
Opening the packaging does not, by itself, cancel this right. If we do not tell you about the right to cancel, the law can extend the period (up to 12 months until we do tell you, then 14 days from that notice).
6.3 Warranty
We provide a 12-month manufacturer’s warranty against defects in materials and workmanship (excludes misuse, drops, water damage, etc.).
7. Limitation of liability
To the fullest extent permitted by law, Golf Draw and Fade Limited shall not be liable for any indirect, consequential, or economic loss arising from the use or misuse of the Product. You use the Product entirely at your own risk. We do not exclude liability for death or personal injury caused by our negligence.
8. Intellectual property
All trademarks (including Vector Shaper), branding, images, and content on the Website are owned by or licensed to Golf Draw and Fade Limited and may not be used without permission.
9. Governing law
These Terms are governed by the laws of England and Wales. Disputes shall be subject to the exclusive jurisdiction of the English courts.
10. Contact
Email: hello@golfdrawandfade.com